Author Topic: Nightly Builds - try the very latest stuff here  (Read 968948 times)

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3394
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Re: Nightly Builds - try the very latest stuff here
« Reply #1000 on: January 27, 2015, 02:00:16 AM »
I noticed that as well regarding RAWMagic throwing down the HAMMER and somehow halting the nightlies for 5D3 1.2.3!

Is this really a big deal? NO... IMO only because I believe I can get more out of the latest nightly 1.1.3 (longer recording times for RAW/MLV as well as FRSP, etc...) whereas 1.2.3 is just simply out of date but can still be used since it still works well for the most part depending on your shooting situations.

I sometimes upgrade to 1.2.3 if need to use HDMI output for certain shoots in order for 'Producers' to see the actual shot on external monitors in real time. (This is not avail in 1.1.3 due to Canon's restrictions)

But for the most part I stick with 1.1.3 to get the most out of my 5D3 in terms of RAW/MLV, FRSP, Dual-ISO and so on...

As I previously stated "I'm a happy swinger between 1.1.3 & 1.2.3" as long as you know what you're doing during the upgrade/downgrade process!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

dmilligan

  • Developer
  • Hero Member
  • *****
  • Posts: 3218
  • 60Da / 1100D / EOSM
Re: Nightly Builds - try the very latest stuff here
« Reply #1001 on: January 27, 2015, 03:21:34 AM »
The only differences of any consequence between the main branch and the 5d3 123 branch are some recent changes to the io_crypt module and about a dozen lines of very minor changes. In other words there is practically no difference between the 123 branch and the nightly builds. Most commits to the repo over the past 6 months have been to "desktop" tools (mlv_dump, raw2dng, cr2hdr, etc) which reside in the same repo. A change to one of these tools triggers a new nightly build, even though no code that is actually part of ML for the cameras has changed.

So the fact that there are recent nightly builds, but the last 5D3 123 build is from August is a bit misleading. There really hasn't been any development progress of any real consequence in the last 6 months.

From all indications, the lack of development progress has been due to personal reasons with devs and not anything really to do with RAWMagic.

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3394
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Re: Nightly Builds - try the very latest stuff here
« Reply #1002 on: January 27, 2015, 06:59:49 AM »
Thanks @dmilligan for the clarification on that part regarding RAWMagic not having anything to do with the hiatus of 1.2.3 -- Makes more sense now!
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

cale.rodriguez

  • New to the forum
  • *
  • Posts: 16
Re: Nightly Builds - try the very latest stuff here
« Reply #1003 on: February 02, 2015, 08:56:55 AM »
Hey guys, I've posted this in the "de-bug" section and no reply.

Running Jan 2015 nightly build on a 1.1.3 5D MARK III and I'm getting no audio.

"Audio failed to stop, state 4 error"

walter_schulz

  • Contributor
  • Senior
  • *****
  • Posts: 396
Re: Nightly Builds - try the very latest stuff here
« Reply #1004 on: February 02, 2015, 09:23:37 AM »
Sorry but a proper bug report doesn't look like this.
There are 6 builds with date "Jan 2015" ...
You haven't mentioned the video mode you were usings: Native Canon (H.264) or MLV/RAW?
You haven't mentioned the modules you loaded.
Steps to reproduce? Steps you tried to avoid this problem?
At which state does this error occur: Beginning or ending of record? Else?

Magic Ball mode: Most likely you are trying to run RAW_REC.mo which doesn't support audio at all. You have to run MLV_REC.mo together with MLV_SND.mo

cale.rodriguez

  • New to the forum
  • *
  • Posts: 16
Re: Nightly Builds - try the very latest stuff here
« Reply #1005 on: February 02, 2015, 12:47:04 PM »
Sweet, that was the issue, thanks.

Is there a difference MLV and RAW in terms of quality?

Frank7D

  • Senior
  • ****
  • Posts: 456
Re: Nightly Builds - try the very latest stuff here
« Reply #1006 on: February 02, 2015, 06:59:12 PM »
"Is there a difference MLV and RAW in terms of quality?"

No.

jeffR

  • New to the forum
  • *
  • Posts: 4
Re: Nightly Builds - try the very latest stuff here
« Reply #1007 on: February 11, 2015, 04:17:20 AM »
The link to the nightly builds is not working.  Is there a way I can get the latest build.....

martyrstar

  • Just arrived
  • *
  • Posts: 1
Re: Nightly Builds - try the very latest stuff here
« Reply #1008 on: February 14, 2015, 02:00:46 PM »
link not working for me either

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7339
Re: Nightly Builds - try the very latest stuff here
« Reply #1009 on: February 14, 2015, 02:13:01 PM »
Try using http instead of https.
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

jeffR

  • New to the forum
  • *
  • Posts: 4
Re: Nightly Builds - try the very latest stuff here
« Reply #1010 on: February 14, 2015, 03:31:13 PM »
https did not work.  I am able to select my camera model, but the link to the zip won't open.

Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7339
Re: Nightly Builds - try the very latest stuff here
« Reply #1011 on: February 14, 2015, 03:35:54 PM »
And http?
Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

jeffR

  • New to the forum
  • *
  • Posts: 4
Re: Nightly Builds - try the very latest stuff here
« Reply #1012 on: February 14, 2015, 08:47:31 PM »
http does not work either.  I tried on a few computers.

pikepike

  • New to the forum
  • *
  • Posts: 2
Re: Nightly Builds - try the very latest stuff here
« Reply #1013 on: February 16, 2015, 07:14:25 PM »
i'm having the same problem the link wont work

DeafEyeJedi

  • Hero Member
  • *****
  • Posts: 3394
  • 5D3 | M1 | 7D | 70D | SL1 | M2 | 50D
Re: Nightly Builds - try the very latest stuff here
« Reply #1014 on: February 16, 2015, 08:03:58 PM »
C'mon...Really?

https://vimeo.com/119783961

Worked on both http & https in case you were curious.
5D3.113 | 5D3.123 | EOSM.203 | 7D.203 | 70D.112 | 100D.101 | EOSM2.* | 50D.109

jeffR

  • New to the forum
  • *
  • Posts: 4
Re: Nightly Builds - try the very latest stuff here
« Reply #1015 on: February 17, 2015, 12:28:13 AM »
The link is broken.  Hope this helps more than what the previous poster did.


This should work guys:
http://builds.magiclantern.fm/jenkins/job/5D2.212/347/artifact/platform/5D2.212/magiclantern-Nightly.2015Jan29.5D2212.zip

a1ex

  • Administrator
  • Hero Member
  • *****
  • Posts: 12422
Re: Nightly Builds - try the very latest stuff here
« Reply #1016 on: February 17, 2015, 09:01:27 AM »
If the link is not working for you, can you provide a video showing what you do? (just like the one uploaded by DeafEyeJedi).

One little request: upload it to youtube (for some reason I couldn't watch anything on vimeo lately)

walter_schulz

  • Contributor
  • Senior
  • *****
  • Posts: 396
Re: Nightly Builds - try the very latest stuff here
« Reply #1017 on: February 17, 2015, 09:10:23 AM »
(for some reason I couldn't watch anything on vimeo lately)
Sounds related to Adobe Flash-Player. Make sure to use latest (16.0.0.305) and you (or some security tool) aren't blocking it.

darkvirus666

  • New to the forum
  • *
  • Posts: 18
Re: Nightly Builds - try the very latest stuff here
« Reply #1018 on: February 20, 2015, 12:28:17 AM »
I am having a lot of problems.

I bought a 5d3 camera unable to upload firm. Finally could install ML  nightly fron february this year (using  5D3-113-bootflag.fir) . But Im still unable to upload to firm123 (is there any way to get a 5D3-123-bootflag.fir or something similar?) .

I show this threath says done... but dont know where the solution is.

http://www.magiclantern.fm/forum/index.php?topic=9827.0

The camera says:

"Update file error. Please check the memory card and reload the battery and try again"

Thank you for helping


Walter Schulz

  • Contributor
  • Hero Member
  • *****
  • Posts: 7339
Re: Nightly Builds - try the very latest stuff here
« Reply #1019 on: February 20, 2015, 05:23:37 AM »
Sorry, but I'm unable to understand what is actually going on. http://www.magiclantern.fm/forum/index.php?topic=9827.0 is *not* about installing ML!

Please clarify:
Which Canon firmware version is installed?
Which Canon firmware do you want to be installed?

Photogs and videographers: Assist in proof reading upcoming in-camera help!. Your input is wanted and needed!

darkvirus666

  • New to the forum
  • *
  • Posts: 18
Re: Nightly Builds - try the very latest stuff here
« Reply #1020 on: February 20, 2015, 09:57:22 AM »
Thank you for answering.


I´ve got the 1.1.3 canon firm with ML nightly built. (there are some isues when installing, but it seems to work perfect)
and I want to update to canons 1.2.3. firm.
 
If I directly put the canon .fir archive in the card it sends the error "unable Update file error. Please check the memory card and reload the battery and try again"

I want to install firm 1.2.3.and then magic lantern in the 1.2.3.

If Im not posting in the right place please excuse me.


walter_schulz

  • Contributor
  • Senior
  • *****
  • Posts: 396
Re: Nightly Builds - try the very latest stuff here
« Reply #1021 on: February 20, 2015, 10:15:40 AM »
Format card inside cardreader.
Copy Canon's firmware file 5D300123.FIR to card.
Insert card into cam und run firmware upgrade.
Insert card into cardreader, delete 5D300123.FIR and copy extracted nightly build contents to card.
Insert card into cam and run firmware update.

darkvirus666

  • New to the forum
  • *
  • Posts: 18
Re: Nightly Builds - try the very latest stuff here
« Reply #1022 on: February 20, 2015, 01:51:37 PM »
What I do:

Format card inside cardreader.
Copy Canon's firmware file 5D300123.FIR to card.
Insert card into cam und run firmware upgrade.

Camera says.... unable Update file error. Please....
----------------

Also tryed:

Format card inside cardreader.
Format card inside cam.
Copy Canon's firmware file 5D300123.FIR to card.
Insert card into cam und run firmware upgrade.

Camera says.... unable Update file error. Please....

And starting become crazy.

walter_schulz

  • Contributor
  • Senior
  • *****
  • Posts: 396
Re: Nightly Builds - try the very latest stuff here
« Reply #1023 on: February 20, 2015, 02:08:32 PM »
Download zip once again http://pel.hu/eoscard
Extract files and copy FIR to card. Run firmware update.

If this doesn't work: Connect cam to PC/Mac via USB and use EOS Utility to install Canon's firmware.
http://addedoptimization.com/5d-mark-iii-firmware-update-using-canon-eos-utility/

darkvirus666

  • New to the forum
  • *
  • Posts: 18
Re: Nightly Builds - try the very latest stuff here
« Reply #1024 on: February 20, 2015, 09:58:39 PM »
done...but same answer from camera....